Time & Attendance Systems: corporate building entrance with controlled access
Access Control Systems

Time and Attendance Systems for Factories, Hospitals and Branches

Capture who worked which shift, calculate late marks and overtime correctly, and send clean data to payroll without manual correction.

Since 2014
Based in Nashik
500+ Clients
Across four states
Survey to AMC
One accountable team
Written and reviewed by the Shruti IT Service engineering team, Nashik. Last updated November 2026.
In short

A time and attendance system records when each employee starts and ends work using a biometric, face or card terminal, applies shift and roster rules, and passes the result to payroll or HRMS. Shruti IT Service installs the terminals, configures shifts and policies, integrates with payroll, and consolidates attendance across plants and branches into one report.

At a glance

Typical timeline
Two to five weeks for a single site, longer for multi-location rollouts with payroll integration.
Key standards
Your shift and leave policy, applicable labour rules, and the DPDP Act 2023 for biometric data.
What you receive
Installed terminals, shift and roster setup, payroll export or integration, reports and admin training.
Best suited for
Factories, contractors, hospitals and businesses with several branches.
Our scope
Terminals, shift rules, payroll link and multi-location consolidation.
Site survey
Headcount, shift patterns, entry points, network availability and payroll software in use.
OVERVIEW

Time & Attendance Systems Overview

Attendance looks simple until it reaches payroll. Late marks, half days, night shifts that cross midnight, overtime, week offs, compensatory leave and contractor workers with different rules all pile onto one number. A time and attendance system captures the punches and applies your rules consistently, so payroll gets a result and not a pile of corrections.

The terminal is the visible part. It may read a fingerprint, a face or a card. What matters more is the configuration behind it: shift definitions, grace periods, rounding rules, overtime thresholds, holiday calendars and approval workflows. A well installed terminal with poor rules produces confident but wrong attendance data.

We install attendance systems for factories, contractors, hospitals and multi-branch businesses from our base in Nashik, delivering across Maharashtra, Gujarat, Madhya Pradesh and Rajasthan. Our scope includes biometric, face and card terminals, shift and roster configuration, payroll and HRMS integration, and consolidation of attendance across locations into one view. This page focuses on workforce time capture. Door security is covered under our biometric and card access control work.

Where a site already has access control, attendance can share the same cards or templates. Where it does not, a standalone attendance terminal is cheaper and simpler. We choose based on your needs, not on selling the larger system.

Ideal for: Factories, contractors, hospitals and multi-branch businesses.

SCOPE OF WORK

What Our Time & Attendance Systems Includes

Our scope runs from the terminal at the gate to the payroll export, with the rules in between written down and tested.

Biometric, face and card attendance terminals

We supply and install terminals matched to workforce and environment, with mounting, power and network. Tip: test candidate terminals with a sample of your own workers, especially if they handle oil, chemicals or cement, before ordering the full quantity.

Shift and roster configuration

We set up shifts, rotating rosters, grace periods, breaks, overtime and holiday calendars from your written policy. Tip: write down the odd cases, such as split shifts and half day rules, before configuration, since each unwritten rule becomes a monthly dispute.

Payroll and HRMS integration

We connect attendance to your payroll through file export, database link or API, using a unique employee ID. Tip: run one full payroll cycle in parallel before switching, and compare the two results line by line.

Multi-location attendance consolidation

We link terminals across plants and branches into one database with location based access for managers. Tip: define a single policy master with controlled local exceptions, so branches do not drift into separate rules.

Reports, corrections and approvals

We configure daily, monthly and exception reports, with correction requests and approvals. Tip: set a cut-off date for corrections each month, so payroll is not held up by late changes.

THE PROBLEM WE SOLVE

Why manual attendance and unmanaged terminals create payroll disputes

In many plants, supervisors still keep muster rolls on paper, and payroll staff re-enter them at month end. Errors are inevitable, and proxy marking is common. Overtime is claimed on memory rather than record. Disputes at salary time consume days of HR effort and damage trust between workers and management.

Where terminals exist, the problem often moves to configuration. Shifts crossing midnight are split into two days, grace periods differ across departments and nobody knows which rule produced a half day. The system is blamed, but the real fault is that rules were never written down before configuration began.

Contractor and multi-site workforce add another layer. Workers from different contractors may need separate reports for billing, while branch offices need consolidated summaries. A system built for a single site with a single shift pattern struggles with this unless it was planned for it from the start.

KEY BENEFITS

What You Gain

Accurate presence record

Biometric, face or card punches replace muster rolls, and proxy attendance becomes much harder. Each punch carries a time, a terminal and a person.

Correct shift and overtime calculation

The system applies grace, rounding, night shift and overtime rules the same way every month, so payroll receives a consistent result and disputes fall.

Payroll ready data

Attendance flows to payroll or HRMS by integration or a scheduled file. Month-end work shrinks from days of data entry to a review of exceptions.

Multi-location visibility

HR sees all plants and branches in one dashboard, with the same policy applied across sites, and local managers see only their own teams.

Contractor workforce control

Contractor workers are tracked by agency, so you can reconcile billed days against actual presence and spot discrepancies before paying invoices.

Fewer disputes

Employees can view their own punches and apply for corrections through a clear approval path, which replaces arguments with a documented record.

OUR PROCESS

How the Work Is Delivered

Attendance projects succeed when the policy is written before the machine is configured, so our first steps focus on rules.

  1. 1

    Policy and workforce review

    We list employee categories, shifts, grace rules, overtime policy, holiday calendars and contractor groups. Where policy is unwritten, we help document it so that configuration has something firm to follow.

  2. 2

    Terminal and location plan

    You receive a plan showing where terminals go, based on entry points and shift change flow. We size the number of terminals from headcount and the time available at shift start, not from a fixed ratio.

  3. 3

    Technology selection

    We select fingerprint, face or card terminals by workforce type and environment. Factory workers with worn fingerprints may need face or card, while offices may prefer fingerprint or face.

  4. 4

    Installation and network

    Terminals are mounted at a comfortable height, powered and networked. Where connectivity is poor, we configure them to store punches locally and upload when the link returns.

  5. 5

    Software, shift and roster configuration

    We create shifts, rosters, rules and approval flows, then test them with sample punches that cover midnight shifts, missed punches, holidays and overtime.

  6. 6

    Payroll integration and parallel run

    We connect to your payroll or HRMS and run attendance in parallel with the old method for one cycle, comparing results to catch rule errors before the system becomes the record.

  7. 7

    Training, handover and support

    HR, supervisors and administrators learn corrections, reports and approvals. Support terms are agreed per site and cover terminal faults, firmware updates and database backup.

TECHNOLOGY AND STANDARDS

Terminal types, shift logic and payroll integration

Fingerprint terminals are low in cost and familiar, but struggle with worn or dirty fingers. Face terminals are touchless, fast at shift change and suit large crowds, but need decent lighting and a liveness check. Card terminals are the fastest and cheapest per punch, though they allow buddy punching unless combined with other controls. Match the method to your workforce. A mixed approach, such as face at the main gate and card at remote sites, is common.

Shift logic is where most projects go wrong. Define shifts with start, end, grace and break rules, and specify how a shift that crosses midnight is assigned to a date. Payroll integration can use a scheduled file export, a database link or an API with the HRMS. Whichever method is chosen, agree the unique employee ID that links the two systems, and test month-end edge cases, such as leave on a holiday, before go-live.

Written attendance and leave policy

The system enforces rules, but the rules must exist on paper. We ask for your policy and flag gaps, such as how half days, late marks and compensatory offs are handled.

Digital Personal Data Protection Act 2023

Fingerprint and face templates are sensitive personal data. We configure on-device storage where possible, limit admin access and set a deletion process when an employee leaves.

Applicable labour and wage rules

Overtime, weekly off and wage period rules come from labour law and your agreements. We configure to your documented policy, and your HR or legal team remains responsible for interpreting the law.

Unique employee identification

A single, never reused employee ID links terminals, attendance and payroll. Name based matching causes duplicates and mismatches, so we insist on an ID based key.

Time synchronisation

Terminals must share a reliable time source. A drifting clock of a few minutes creates false late marks, so we configure network time sync and check it during testing.

WORKED EXAMPLE

Worked example: attendance for a 600 worker plant with three shifts

Take a manufacturing plant with 600 workers on three shifts: 6 am to 2 pm, 2 pm to 10 pm and 10 pm to 6 am. A further 120 contractor workers come from four agencies. Shift change happens at three gates, with about 200 people arriving within ten minutes. Today, supervisors keep paper muster and payroll re-enters data over three days.

At 200 people in ten minutes, each terminal must handle around 20 people a minute at peak, so we place two face terminals at each of the three gates. A face match takes about a second or two, which fits that flow. Contractor workers are tagged by agency in the software. The night shift is defined to belong to the date on which it starts, avoiding the midnight split.

Rules include a grace period of ten minutes, overtime after eight hours with supervisor approval, and weekly off logic. A parallel run with the paper muster for one cycle reveals three rule errors, including a holiday that was not entered, which are fixed before payroll switches over to the system export.

What the client typically sees
  • Payroll data ready within a day of period end
  • Contractor days reconciled against agency invoices
  • Night shift attendance assigned to the correct date
  • Overtime tied to approved, recorded hours

This is an illustrative scenario built from typical site conditions. Actual quantities, timelines and results depend on your site survey.

SERVICE AREA

Time & Attendance Systems Across Four States

We are based in Nashik and deliver across Maharashtra, Gujarat, Madhya Pradesh and Rajasthan. Each state has its own utilities, approvals and site conditions, and these are the points that matter most for this service.

Maharashtra

Factories, hospitals and contractor heavy sites need shift, overtime and weekly off rules written down before configuration. Maharashtra plants often run three shifts with contract labour, so reports by agency matter. Confirm statutory registers and wage rules with your HR or legal team.

Gujarat

Multi-branch trading and manufacturing groups often keep attendance across many towns. Terminals that store punches locally and upload later suit uneven connectivity. Shift patterns and weekly off rules differ between units, so we keep one policy master with controlled local exceptions.

Madhya Pradesh

Large plants in industrial areas such as Pithampur run big shift change crowds and many contractor workers. Face or card terminals at several gates keep queues short. Worn fingerprints are common among manual workers, so we trial terminals with your staff before the full order.

Rajasthan

Mining linked, cement and solar construction sites sit in remote areas with poor links and extreme heat. Terminals must store punches offline and tolerate high temperature and dust. Contractor crews move between sites, so enrolment and agency tagging are planned centrally.

INDUSTRIES SERVED

Where This Work Is Most Often Needed

Manufacturing and Industrial PlantsHealthcare and HospitalsEPC and Infrastructure ContractorsWarehousing and LogisticsBanking and Financial ServicesEducation and Campuses
WHY SHRUTI IT SERVICE

Why Teams Work With Us on This

Rules first, machines second

We help write the attendance policy into clear rules before configuring anything, which prevents the common situation where the machine is blamed for unwritten policy.

Parallel run before go-live

We run the new system beside the old method for one cycle and compare outcomes, so payroll switches over only after the results match.

One vendor for time and doors

We install access control and visitor systems too, so cards and templates can serve both entry and attendance without duplicate enrolment.

Field team from Nashik

Terminal faults, firmware updates and moves are handled by engineers mobilised from our Nashik base, with visits planned by route and site cluster and support terms agreed per site in your contract.

INSIGHTS AND PROJECTS

Guides and Projects Related to This Service

FAQ

Frequently Asked Questions

01How much does a time and attendance system cost?

Cost depends on the number of terminals, the technology and the software licensing model, which may be per employee, per terminal or per site. Face terminals cost more than card readers. Payroll integration and multi-location consolidation add effort. Send headcount, shift pattern and payroll software details, and we will quote hardware and software separately.

02What is the difference between access control and time attendance?

Access control decides whether a door opens, and attendance records working time. They can share cards or biometric templates, but the rules differ. Attendance applies shifts, grace and overtime to produce payroll data. Many sites use one enrolment for both, with separate terminals or reader functions for each purpose.

03Can attendance be integrated with our payroll or HRMS?

Usually yes. Common methods are scheduled file export, direct database link or API. The essential step is a unique employee ID shared by both systems. We test month-end cases, such as leave on holidays and night shifts, and run one cycle in parallel before switching to the integrated flow.

04Will it work for night shifts and rotating rosters?

Yes, if shifts are defined properly. A night shift that crosses midnight must be assigned to a single date, usually the start date. Rotating rosters are configured as patterns by group. We test with sample punches covering midnight, late arrival and early exit, before the rules are used for real payroll.

05Which is better for factory workers: fingerprint, face or card?

Face or card often works better for manual workers, because worn fingerprints cause frequent rejections. Cards are fastest but allow buddy punching. Face is fast and hard to share, though it needs good lighting. We test terminals with your workers before deciding, and many sites mix methods across gates.

06How do we manage contractor attendance?

Tag each contractor worker with an agency and a validity period in the system. Reports by agency show actual days present, which you compare with their invoices. We recommend enrolment at the gate by a supervisor, with contractor cards expiring on contract end, so ex-workers are not left active.

LET'S BUILD TOGETHER

Ready to Discuss Time & Attendance Systems?

Tell us about your site, timeline and any tender documents. Our Nashik team will respond with a survey plan and a clear scope.

+91 96070 53335
Call Now