Enterprise Networking: LAN & WAN: commercial building with structured it infrastructure
IT Infrastructure & Managed Services

Enterprise Networking: LAN and WAN Design and Deployment

A switching and routing design that keeps every site, plant and branch connected, segmented and documented, so faults are traced in minutes and not argued over for days.

Since 2014
Based in Nashik
500+ Clients
Across four states
Survey to AMC
One accountable team
Written and reviewed by the Shruti IT Service engineering team, Nashik. Last updated November 2026.
In short

Enterprise networking is the design and deployment of the LAN switching, routing and WAN links that connect users, servers and branches. We build a core, distribution and access layout, plan VLANs and QoS, link sites by MPLS, leased line, broadband or SD-WAN, and hand over configuration backups, IP plans and monitoring dashboards.

At a glance

Typical timeline
3 to 8 weeks for a single site, longer for multi-branch rollouts, depending on link lead times
Our scope
Core, distribution and access switching, routing, VLANs, QoS, WAN and monitoring
What you receive
IP and VLAN plan, topology diagrams, configuration backups and a monitoring setup
Key design rules
Redundant core, loop-free access, role-based VLANs and documented routing
Best suited for
Multi-location enterprises, factories and campuses
Site survey
Traffic, application and link review before the design is proposed
OVERVIEW

Enterprise Networking: LAN & WAN Overview

Enterprise networking is where an organisation decides how its people, machines and applications talk to each other, and how far that conversation is allowed to go. A good LAN and WAN design is rarely exciting. It is predictable: users reach the application in the same time every day, a cut link triggers an automatic reroute, and a new branch comes online by following a template instead of an improvisation.

We design enterprise networks on the classic three layers, collapsed to two on smaller sites. Access switches connect desks, printers, access points and cameras. Distribution switches aggregate floors or buildings and apply policy. The core moves traffic between distribution blocks, servers and the WAN edge at wire speed. A single building with under 300 users rarely needs a separate core, and we say so, since an unneeded layer is cost and complexity you carry for years.

On the WAN side, the real choice is between private circuits such as MPLS or point-to-point leased lines, internet-based VPN over broadband or ILL, and SD-WAN that manages several of these together. Each has a place. A plant that runs ERP over a single link needs different treatment from a retail chain with forty small branches. We help you compare options on latency, uptime commitments, cost per Mbps and how long the carrier takes to deliver a circuit in your area.

Our engineers are based in Nashik and deploy across Maharashtra, Gujarat, Madhya Pradesh and Rajasthan, including industrial estates where carrier choice is limited and last-mile redundancy needs planning. Every project ends with documentation that your own staff, or the next vendor, can use without calling us.

Ideal for: Multi-location enterprises, factories and campuses.

SCOPE OF WORK

What Our Enterprise Networking: LAN & WAN Includes

Our enterprise networking scope covers the full path from the access port on a desk to the WAN edge at each site.

Core, distribution and access switching

We select, stage, install and configure the switching layers sized to your user and traffic count. You get a documented topology with redundancy where the business needs it. Our tip: size uplinks for the traffic you expect in five years, because 1G uplinks on a Wi-Fi 6 floor become the bottleneck early.

VLAN design, routing and QoS

We plan role-based VLANs, inter-VLAN routing and access policies, then mark and queue traffic. You receive a policy table that explains why each rule exists. Keep guest and plant networks on separate VLANs with no route to the server VLAN, and test that isolation.

SD-WAN and multi-branch connectivity

We design and deploy site-to-site links using leased lines, broadband, 4G/5G backup and SD-WAN or IPsec. You receive a link inventory with carrier contacts and circuit IDs. Ask carriers for the last-mile path, because two vendors can share one duct and fail together.

Network monitoring and documentation

We set up monitoring for device health, links and errors, and deliver diagrams, IP plans and configuration backups. Schedule automatic backups weekly, since the configuration you need after a failure is always the one changed last week.

THE PROBLEM WE SOLVE

What goes wrong in networks that grew without a design

Most enterprise networks start with a router and a few switches and then grow by adding whatever is needed that week. After five years, there is one flat network with every device in the same broadcast domain, a spanning tree topology nobody has examined, switches of three generations and a default VLAN that carries everything including guest laptops and plant controllers. A single faulty NIC or a looped patch cable can then take down the entire site.

WAN problems are quieter. A branch is served by one broadband link with no failover, so a cut cable means a day of paper billing. Voice and video share bandwidth with backups and software updates, so calls break up at 4 pm every day. Nobody has a baseline, so the carrier says the link is healthy and the user says it is slow, and both are partly right.

The third problem is knowledge. Configurations live in the head of one engineer. When that person leaves, nobody knows why a static route or an access list exists, and nobody dares to remove it. Documentation and configuration backups are not extras. They are the protection against that risk.

KEY BENEFITS

What You Gain

Contained faults

Segmentation through VLANs and routed boundaries limits a loop, a broadcast storm or a malware outbreak to a small part of the network instead of the whole site.

Predictable application performance

QoS marks voice, video and business-critical traffic so that a large file copy does not cause call drops. Policies are tested under load, not only drawn on a diagram.

Resilience where it matters

Redundant core links, dual uplinks from distribution and dual WAN paths keep a single cable or switch failure from stopping production or billing.

Faster branch rollout

A standard branch template with agreed IP ranges, VLANs and policies lets new locations come online in days once the carrier circuit is live.

Visibility

SNMP and flow-based monitoring show link utilisation, errors and device health, so capacity decisions rest on data and not on complaints.

Lower dependence on individuals

Configuration backups, IP plans and topology diagrams are stored with you. Any qualified engineer can take over the network without a long discovery phase.

OUR PROCESS

How the Work Is Delivered

Networks cannot be paused for a rebuild, so the sequence below puts discovery and a tested cutover plan ahead of any configuration change.

  1. 1

    Discovery and traffic review

    We list sites, users, servers and critical applications, collect existing configurations and measure link utilisation over at least a week. We also identify single points of failure and equipment that is out of support.

  2. 2

    Design and IP plan

    We draw the topology, plan VLANs by role, allocate address space with room for growth, and choose routing protocols. For WAN, we compare carrier options with their delivery times and uptime commitments.

  3. 3

    Supply and staging

    Switches and routers are configured and tested on our bench before they go to site, with firmware versions standardised. This shortens the on-site window and reduces mistakes made under pressure.

  4. 4

    Installation and cutover

    We mount equipment, connect uplinks and migrate in planned windows, floor by floor or site by site. A rollback plan with saved configurations is ready before every cutover.

  5. 5

    Testing and failover validation

    We test throughput, latency, VLAN isolation, QoS behaviour and failover by pulling links and powering down units in a controlled way, with your team present to witness results.

  6. 6

    Monitoring and documentation

    Monitoring is configured with alerts for link loss, error rates and high utilisation. We deliver the diagrams, IP and VLAN tables, port maps and configuration backups.

  7. 7

    Handover and support

    Your IT team is briefed on the design and the change procedure. An AMC or managed support option covers firmware updates, configuration changes and capacity reviews.

TECHNOLOGY AND STANDARDS

Switching, routing and SD-WAN in practice

At the access layer, we use managed switches with PoE or PoE+ as needed for phones, cameras and access points, and size the PoE budget with 20 percent headroom. Uplinks are 10G wherever Wi-Fi or CCTV traffic is expected. Spanning tree is kept simple, with root bridges fixed on the distribution or core, BPDU guard on access ports and storm control enabled. Where the design allows, we prefer stacking or multi-chassis link aggregation so that no link sits blocked and idle. Layer 3 is placed at distribution or core, with inter-VLAN routing at line rate and access control lists at policy boundaries.

On the WAN, OSPF or BGP carry routes between sites, and IPsec tunnels protect traffic on public links. SD-WAN is useful when you hold two or more links per site and want application-aware steering, central policy and a cloud-managed view. It is not always the right answer. A single-site business with one cloud application may be better served by two internet links and a good firewall, and SD-WAN licences would be an avoidable recurring cost. We show both options with total cost over three to five years before you decide.

IEEE 802.1Q VLANs

VLANs separate users, servers, voice, cameras, guests and plant systems. We define a role-based scheme and keep the number manageable, since 40 VLANs on a 100 user site is a sign of poor design.

IEEE 802.3at and 802.3bt PoE

We budget switch PoE power by class: access points, IP phones and cameras draw differently. The total switch budget, not just the per-port limit, decides how many devices a switch can feed.

Spanning tree and link aggregation

Rapid or multiple spanning tree plus IEEE 802.3ad link aggregation prevent loops and keep redundant paths usable. Root bridge placement is a design decision, never left to default.

Routing and addressing hygiene

We use private address ranges with summarisable blocks per site, so route tables stay small and a new branch needs no renumbering. IPv6 readiness is planned where your ISP supports it.

QoS markings

Voice, video, business applications and bulk traffic are classified with DSCP values and queued accordingly. Policies are consistent end to end, because a mark dropped at one hop does nothing.

WORKED EXAMPLE

A typical project: a plant, a head office and 8 branches

Imagine a manufacturer with one plant of 350 users in an MIDC estate, a head office of 120 users and 8 small branches of 10 to 20 users each. The plant runs ERP and a MES system, the head office hosts a small server room, and branches mainly use ERP and email. Today every site is on a single broadband line with a basic router and no failover.

The design places a pair of core switches at the plant with dual 10G uplinks to each distribution switch, and separate VLANs for office users, shop-floor terminals, voice, cameras, servers and guests. Each major site gets two WAN paths, one leased line or ILL as primary and one broadband or 4G/5G link as backup, joined by an SD-WAN or IPsec mesh. Branches follow a single template with a small firewall and one access switch.

Staging comes first. Equipment is configured on our bench and shipped with a labelled checklist. Cutover at the plant happens on a Sunday, building by building, with each step reversible. After go-live we monitor for two weeks, tune QoS from observed traffic and hand over the diagrams, IP plan and backups. Branch rollouts then follow at one or two a week, limited mostly by carrier delivery.

What the client typically sees
  • Plant faults contained to a single VLAN, not the whole site
  • Branch outage on a primary link recovered through backup path
  • Voice and ERP traffic prioritised during backup windows
  • Complete IP plan and configuration backups held by the client

This is an illustrative scenario built from typical site conditions. Actual quantities, timelines and results depend on your site survey.

SERVICE AREA

Enterprise Networking: LAN & WAN Across Four States

We are based in Nashik and deliver across Maharashtra, Gujarat, Madhya Pradesh and Rajasthan. Each state has its own utilities, approvals and site conditions, and these are the points that matter most for this service.

Maharashtra

Plants in MIDC estates usually have two or three carrier choices at best, and the same duct often serves several. We ask each carrier for its last-mile path and plan a second link on a different route, since monsoon digging and road works cut fiber more often than equipment fails.

Gujarat

Dense GIDC estates and port-linked logistics sites often have good carrier availability in the main cities but thin coverage in smaller industrial areas. We compare leased line, ILL and radio options per site, and use SD-WAN only where several links per site justify the licence cost.

Madhya Pradesh

Branches in smaller towns and industrial areas such as Pithampur often depend on a single carrier with long repair times. We design branch templates with a mobile data backup link and test failover, so that billing and ERP continue when the primary circuit is down.

Rajasthan

Long distances between sites, and remote mines or solar plants, make WAN latency and link repair time the main design factors. We prefer routed designs with local survivability, so a site keeps working on its own when the backhaul is cut, and we keep switch cabinets dust-sealed.

INDUSTRIES SERVED

Where This Work Is Most Often Needed

Manufacturing and Industrial PlantsCorporate Offices and IT ParksEducation and CampusesBanking and Financial ServicesWarehousing and LogisticsSmart City and Government
WHY SHRUTI IT SERVICE

Why Teams Work With Us on This

Passive and active under one roof

We build the cabling, switching and Wi-Fi together, so uplink speeds, PoE loads and rack space are consistent from the first drawing.

Vendor-neutral recommendations

We recommend equipment classes that match your traffic and budget, and explain trade-offs in licences and support, rather than steering to one box.

Documented handover

You get topology diagrams, an IP and VLAN register and tested configuration backups, so your network does not depend on one person's memory.

Mobilised from Nashik

Design, staging and cutover are led by engineers travelling from our Nashik base. Because switches are pre-configured on our bench, multi-site rollouts need short site visits, and follow-up visits are planned by route and site cluster.

Need AMC for an existing system?

We maintain installations done by other vendors too, after a short audit of what is already on site.

See AMC options
INSIGHTS AND PROJECTS

Guides and Projects Related to This Service

FAQ

Frequently Asked Questions

01How much does an enterprise network cost?

The price depends on user count, number of switches, PoE needs, redundancy level, WAN links and licences. Hardware is usually the largest part, followed by carrier charges that recur monthly. We cannot quote responsibly without a survey, but we provide a three to five year view that includes licences and support, so the lowest purchase price is not mistaken for the lowest total cost.

02What is the difference between LAN and WAN?

A LAN connects devices inside one site, such as a building or plant, over cables and Wi-Fi that you own. A WAN connects separate sites over links you lease from carriers, such as MPLS, leased line or broadband. LAN design focuses on speed and segmentation, while WAN design focuses on cost, latency, uptime and encryption of traffic across public links.

03Do we need SD-WAN for our branches?

Not necessarily. SD-WAN helps when you have several branches, two or more links per site and want central policy and automatic failover based on application performance. For two or three sites with one critical application, dual links and a good firewall can be simpler and cheaper. We compare both on cost and operational effort before recommending.

04How long does a LAN and WAN upgrade take?

A single site usually takes 3 to 8 weeks from design approval to cutover, including staging. Multi-branch programmes run longer because carrier circuits can take several weeks to deliver, especially outside major cities. We fix cutover windows with your operations team and schedule work for weekends or night shifts to avoid disrupting production.

05Can you work with our existing switches?

Yes, if they are still supported and meet the design needs. We audit existing equipment for firmware, port speed, PoE budget and end-of-support dates. Where reuse is sensible, we build it into the design. Where a switch is a risk, we say so and show the cost of replacing it against the cost of keeping it.

06What documentation will we receive?

You receive a topology diagram, IP and VLAN register, port and patch maps, routing and policy summaries, configuration backups, the monitoring dashboard access and a short runbook for common faults. These documents are stored in your hands, not ours, so that you can change vendors or train new staff without losing network knowledge.

LET'S BUILD TOGETHER

Ready to Discuss Enterprise Networking: LAN & WAN?

Tell us about your site, timeline and any tender documents. Our Nashik team will respond with a survey plan and a clear scope.

+91 96070 53335
Call Now